STANDARD

    Normally thickness and width tolerances of regular stainless steel strips and coils are regulated by the standard DIN EN 9445-2

Grade

• Grade 304/304L (UNS S30400/S30403, EN 1.4301/1.4307)
• Grade 316L (UNS S31603, EN 1.4404)
• Grade 409L (UNS S40900, EN 1.4512)
• Grade 430 (UNS S43000, EN 1.4016)
• Grade 441 (UNS S44100, EN 1.4509)

Finish

• No.1 Hot Rolled Stainless Steel Strip
• 2D Cold Rolled Stainless Steel Strip
• 2B Cold Rolled Stainless Steel Strip
• BA Cold Rolled Stainless Steel Strip
• Brushed (No.3/No.4/No.5/No.5), Scotch Brite and Hairline Finish Stainless Steel Strip
Slitting Thickness     
0.3 – 3.0mm
Width     
10 – 750mm
Other special dimensions are acceptable upon the request
Coating     
No paper, PE or Laser PE coating
Paper Interleaved was acceptable depending on the width
COIL ID     
508mm / 610mm
Non-standard diameters will accepted depending on thickness and width of the coil
Edge of Strip     
Normal slit edge (burr height will depend on the thickness)

PACKING

    Standard Package: Cardboard encase the ends of the coil, with core and out steel edge protection. (No Cardboard was accepted according to customers’ instructions)
    Strips are wrapped with metal strapped and packed in strong wooden pallets.
    Special customized package is acceptable upon customers’ request